Mag 254 and Mag 250-- Output mismatch issue

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view

Mag 254 and Mag 250-- Output mismatch issue

I started my map 254 device and it started with a Output mismatch message and asked to change the mode to SD mode or use HDMI mode .

So basically the device was set to use HDMI cable but i know this device work with the SD cables that come with the box.

To set it up to work with the SD cables, first make sure you have connected the cables correctly.

Turn off the box by disconnecting the cable. Press the menu button which is the button with some horizontal lines and a dot at the beginning beside the Ok and arrow keys.

Press the menu button and start the box by connecting the power cable back. A blue screen will apprear. In that screen the set the TV system to NTSC. Exit and save.